63" Double Ended Chainsaw Bar - $400 (Eureka)

This is a brand new double ended chainsaw bar.
From renowned German company Sägenspezi.
High quality precision machined solid steel bar.
The 63" bar will work with most Alaskan style sawmills from 48-60".
This is designed for a twin powerhead setup.
With 2 MS660/661 type saws it will use a 185 Drive Link Ripping chain 3/8"x.
063, or a 168 Drive Link Ripping chain that is .
404x.
063.
You must check that the drive sprockets of the two machines as well as the chain must be in the same pitch.
The following chains are recommended: 168 drive links with semi-chisels in .
404" .
063“ 168 drive links with full chisels in .
404" .
063“ 168 carbide drive links in .
404" .
063“ 185 drive links with semi-chisels in 3/8" .
063“ 185 drive links with full chisels in 3/8" .
063“ 185 ripping drive links in 3/8" .
063“ 185 carbide drive links in 3/8" .
063“ I recommend a 10* ripping chain for the smoothest cuts! This all-steel guide bar without sprocket nose is durable and of high quality.
The guide is ideal for ripping cuts and mobile chainsaw mils.
Total bar length: 160 cm or 63" (cutting length varies depending on the chainsaws fitted).
Cutting length: approx.
130 cm or 51"-56" depending on saws used.
Bar width: 11 cm or 4.
3" Bar thickness: 6 mm or .
236" The guide bar is supplied with appropriate spacer sleeves which must be fitted depending upon specific chainsaw.
Depending on the application, it is also possible to use an additional oiler.
A helper handle is another option but I do not use these and so cannot tell you what length of chain you might need.
Custom length of ripping chain is also available upon request! Check my other posts too! If you are looking for other milling equipment I also carry Alaskan saw mills and chainsaws.
For more information and availability of current inventory check out the website or give a call.
https://neotecworld.
com/warrior Call or text Sky: 5zero9-3two2-six69one