Was $759.
95*
Now $699.
99*
The ECU is like our CDI and EFI Interceptor rolled into one module controlling not only Spark timing and Voltage output but also Fuel Mapping and other engine management functions.
The result is more power, better power, easier starting and ultimately faster lap times.
This unit comes pre-programmed with 10 Performance Fuel & Spark timing maps as well as having 3 additional switches for user trimming of Fuel in Lo, Mid and Hi throttle openings.
The ECU plugs directly into the bikes standard wiring harness and interfaces with all the standard engine sensors such as ECT (Engine Coolant Temperature), IAT (Intake Air Temperature), MAP (Manifold Absolute Pressure), TPS (Throttle Position Sensor), CPS (Crank Position Sensor) to adjust fuel and spark timing for optimum power delivery in all weather, altitude and load conditions.
Performance gains vary depending on Throttle and RPM points however typically gains are in Top End power and Bottom End throttle response is expected from the “Power” settings and a smoother
more tractable or rideable power from the “Traction” settings.
We have done extensive work to include tune parameters which improve starting and almost eliminate the flameouts experienced with some EFI MX bikes.
All of the development work is done for you! All that is left is for you to do is chose a setting that best suits your riding style or track conditions and ride! The ECU is also fully programmable (Software not supplied) with parameters that are far more extensive than those found in any factory setting tools, such as Rev Limits, Throttle Enrichment & Decay time, Fuel timing, High Resolution Mapping, Dwell Time, Voltage Output and trim tables for cold starting, air intake temperature (IAT), Engine Coolant Temperature (ECT), Barometric Pressure, Battery voltage, etc.
In addition there is real time logging & graphing of many parameters (when combined with the ECU Software – not included)
Model Specific Features
Improved bottom end Power and throttle response
Improved top end over Rev Power
Power Ignition & Fuel Mapping for standard and modified engines
Traction – Start and Enduro maps for traction and throttle control
Better starting and stall prevention
Higher Rev Limits
Advances Fuel Injection Timing for improved atomization and response
Traction Control, Launch Control and Map Selection via the STD Handlebar Switch
Key Features
Pre Programmed with 10 Performance Fuel & Ignition maps – all the work is done for you!
Instant Plug in Performance (replaces standard ECU with no mods to wiring required)
Fuel Trim Switches adjust fuel mapping by 12.
5% to -10% in Lo , Mid and Hi throttle bands
Adjustments require only a screwdriver and integrated switches provide visual feedback.
Simple to install with mounting hardware supplied (where required)
V-Boost – Programmable Voltage Boost Circuit for maximizing Spark Energy across the entire rev range
Higher / Lower Rev Limit (where required)
Robust design is fully encapsulated and O-ring sealed
Diagnostic Flash codes – tests for sensor faults and flashes codes to OEM FI light
Race Proven reliability
Re Programmable (Software and Interface hardware not Included)
All Vortex products are factory programmed with Performance Fuel and Ignition Maps developed through extensive dyno and track testing by Vortex Ignitions engineers with our network of race teams worldwide.
Vortex ECU’s are a performance product and is designed for closed course competition use only.
By purchasing this product you understand that the parts, installation and performance modifications are not emissions or noise compliant and are for closed course competition use only.
Find this Accessory and more at
Pacific Motorsports
4001 Broadway
Eureka, CA 95503
707-443-8031
*Price does not include taxes.
Sale price uses all dealer/manufacturers rebates/incentives.
Please verify any information in question with Pacific Motorsports.
Whatsapp
